Esteem GLX Wagon L4-1.8L (1999)
Malfunction Indicator Lamp: Symptom Related Diagnostic Procedures
Table A-1 MIL Circuit Check - Lamp Not on W/Ign. on/ENG Off
WIRING DIAGRAM
CIRCUIT DESCRIPTION
When the ignition switch is turned ON, ECM causes the main relay to turn ON (close the contact point). Then, ECM being supplied with the main
power, turns ON the malfunction indicator lamp (MIL). When the engine starts to run and no malfunction is detected in the system, MIL goes OFF
but if a malfunction was or is detected, MIL remains ON even when the engine is running.
INSPECTION
Table A-2 MIL Circuit Check-Lamp Remains on After Engine Starts
