Esteem GLX Wagon L4-1.8L (1999)
Ignition Timing: Adjustments
INSPECTION AND ADJUSTMENT
NOTE: Before starting engine, place transmission gear shift lever in "Neutral", and set parking brake.
1. Detach timing hole cover.
2. Connect SUZUKI scan tool. [Using SUZUKI SCAN TOOL]
3. Start engine and warm it up to normal operating temperature.
4. Make sure that all of electrical loads except ignition are switched off.
5. Check to be sure that idle speed is within specification.
Idle speed: 750 ± 50 (rpm)
6. Fix ignition timing by using "FIXED SPARK" mode of SUZUKI scan tool.
[Not using SUZUKI scan tool]
Open relay box.
Connect D and E terminals of monitor (Diag. 1) connector or E to body by using service wire so that ignition timing is fixed on initial one.
7. Set timing light to No.1 ignition harness.
8. Using timing light, check that timing is within specification.
