suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Tire Mounting and Demounting|Page 762 > < Tire Mounting and Demounting
Page 1
background image

Tires: Service and Repair
Replacement Tires

TIRES REPLACEMENT 

When replacement is necessary, the original equipment type tire should be used. Refer to the Tire Placard. Replacement tires should be of the same
size, load range and construction as those originally on the vehicle. Use of any other size or type tire may affect ride, handling, speedometer/odometer
calibration, vehicle ground clearance and tire or snow chain clearance to the body and chassis.

WARNING:  Do not mix different types of tires on the same vehicle such as radial, bias and bias-belted tires except in emergencies, because
handling may be seriously affected and may result in loss of control.
 

It is recommended that new tires be installed in pairs on the same axle. If necessary to replace only one tire, it should be paired with the tire having the
most tread, to equalize braking traction.

The metric term for tire inflation pressure is the kilopascal (kPa). Tire pressures is usually printed in both kPa and psi on the Tire Placard.
Metric tire gauges are available from tool suppliers.
The chart shown converts commonly used inflation pressures from kPa to psi.

Tire Mounting and Demounting|Page 762 > < Tire Mounting and Demounting