Esteem GLX Wagon L4-1.8L (1999)
3. Apply grease to outside bearing, outside inner race and oil seal lip.
"A": Grease 99000-25010 or equivalent.
4. Install wheel hub to knuckle by tightening drive shaft nut. Don't tap wheel hub.
5. Install brake disc.
Tightening Torque (a): 5.5 Nm (4.0 ft. lbs.)
6. Install brake caliper/caliper carrier.
7. Tighten caliper carrier bolts to specified torque.
Tightening Torque (b): 85 Nm (61.5 ft. lbs.)
8. Depress foot brake pedal and hold it there.
Tighten new drive shaft nut to specified torque.
Tightening Torque (c): 175 Nm (126.5 ft. lbs.)
9. Calk drive shaft nut as shown.
WARNING: Be careful while calking nut so that no crack will occur in calked part of nut. Cracked nut must be replaced with new one.
10. Install wheel and lower hoist.
