Esteem GLX Wagon L4-1.8L (1999)
1. Clean mating surfaces of fuel pump assembly and fuel tank.
2. Install new gasket, fuel pump assembly and plate to fuel tank.
As both fuel pump installation face of fuel tank and plate have cutout, match them when installing these parts.
3. Tighten fuel pump assembly bolt to specified torque.
Tightening Torque
(a): 10 Nm (1.0 kgm, 7.5 lb-ft)
4. Connect fuel vapor hose and pipe joints to fuel pump assembly after cleaning pipe inserted to joint.
CAUTION: When connecting joint, push joint into pipe till joint lock clicks and check to ensure that pipes are connected securely, or fuel leak
may occur.
5. Connect electric connector to fuel pump assembly.
6. Install fuel tank to vehicle referring to "Fuel Tank Installation".
