Esteem GLX Wagon L4-1.8L (1999)
Fuel Injector: Testing and Inspection
Component Inspection
Inspection
WARNING: As fuel is injected in this inspection, perform in a well ventilated area and away from open flames.
Use special care to prevent sparking when connecting and disconnecting test lead to and from battery.
1. Install injector and fuel pressure regulator to special tool (injector checking tool).
NOTE: Remove grommet from injector, then install injector to special tool and tighten bolts by hand.
Special Tool
(A): 09912-58421
2. Connect special tools (hoses and attachment) to pipes of vehicle.
Special Tool
(B): 09912-58431
3. Connect special tool (test lead) to injector.
Special Tool
(C): 09930-88521
4. Install suitable vinyl tube onto injector nozzle to prevent fuel from splashing out when injecting.
5. Put graduated cylinder under injector as shown.