Esteem GLX Wagon L4-1.8L (1999)
Fuel Injector: Testing and Inspection
On-Vehicle Inspection
On-Vehicle Inspection
1. Using sound scope or such, check operating sound of injector when engine is running or cranking.
Cycle of operating sound should vary according to engine speed.
If no sound or an unusual sound is heard, check injector circuit (wire or coupler) or injector.
2. Disconnect coupler from injector, connect ohmmeter between terminals of injector and check resistance.
Resistance of injector: 10.8 - 13.2 Ohm at 20 °C, 68 °F
If resistance is out of specification, replace.
3. Connect coupler to injector securely.
