Esteem GLX Wagon L4-1.8L (1999)
Fuel Pressure Pulsation Damper: Service and Repair
REMOVAL
1. Relieve fuel pressure according to procedure.
2. Disconnect negative cable at battery.
3. Remove damper from delivery pipe. Use backup wrench when loosening.
CAUTION: A small amount of fuel may be released when damper is removed. In order to reduce the chance of personal injury or fire,
cover damper with a shop cloth and place it in an approved container.
INSTALLATION
For installation, reverse removal procedure and note the following precautions.
-
Make sure to use new gaskets and apply thin coat of engine oil to them.
-
Using backup wrench, tighten damper to specified torque.
Tightening Torque
(a): 30 Nm (3.0 kg-m, 22.0 lb-ft)
-
With engine "OFF" and ignition switch "ON", check for fuel leaks around fuel line connection.
