suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Sensors and Switches - Ignition System > < Ignition Control Module|Service and Repair
Page 1
background image

Ignition Control Module: Service and Repair

IGNITION COIL ASSEMBLY (IGNITER AND IGNITION COIL)

REMOVAL

1. Disconnect ignition coil coupler.
2. Remove ignition coil bolt, and then pull out ignition coil (5).

INSTALLATION

1. Install ignition coil (s) securely.
2. Tighten ignition coil bolt (s), and then connect ignition coil coupler (s).

Tightening Torque
(a): 3 Nm (0.3 kg-m, 2.5 lb-ft)

Sensors and Switches - Ignition System > < Ignition Control Module|Service and Repair