Esteem GLX Wagon L4-1.8L (1999)
Fuel Cut Control Unit: Testing and Inspection
FUEL CUT OPERATION
INSPECTION
NOTE: Before inspection, check to make sure that gear shift lever is in neutral position and that parking brake lever is pulled all the way up.
1. Warm up engine to normal operating temperature.
2. While listening to sound of injector by using sound scope or such, increase engine speed to higher than 3,000 r/min.
3. Check to make sure that sound to indicate operation of injector stops when throttle valve is closed instantly and it is heard again when engine
speed is reduced to less than about 2,000 r/min.
