Esteem GLX Wagon L4-1.8L (1999)
Ignition Control Module: Service and Repair
IGNITION COIL ASSEMBLY (IGNITER AND IGNITION COIL)
REMOVAL
1. Disconnect ignition coil coupler.
2. Remove ignition coil bolt, and then pull out ignition coil (5).
INSTALLATION
1. Install ignition coil (s) securely.
2. Tighten ignition coil bolt (s), and then connect ignition coil coupler (s).
Tightening Torque
(a): 3 Nm (0.3 kg-m, 2.5 lb-ft)
