Esteem GLX Wagon L4-1.8L (1999)
Engine Temperature Sensor: Service and Repair
ENGINE COOLANT TEMPERATURE SENSOR (ECT SENSOR)
REMOVAL
1. Disconnect negative cable from battery.
2. Drain cooling system.
3. Disconnect coupler from ECT sensor.
4. Remove ECT sensor from water outlet pipe.
INSTALLATION
Reverse removal procedure noting the following.
-
lean mating surfaces of sensor and water outlet pipe.
-
Tighten ECT sensor to specified torque.
Tightening Torque
(a): 15 Nm (1.5 kg-m, 11.0 lb-ft)
-
Connect coupler to sensor securely.
-
Refill cooling system.
