Esteem GLX Wagon L4-1.8L (1999)
3. Disconnect fuel pump lead wire connector from bracket sub assembly.
4. Remove fuel pump with lead wire, grommet and spacer from bracket sub assembly.
5. Remove lead wire and/or grommet as necessary.
CAUTION: When removing grommet from fuel pump or bracket sub assembly, be very careful not to cause damage to grommet installed (sealed
section in bore). Should it be damaged, replace it with new one, or fuel will leak from that part.
REASSEMBLY
NOTE: Use of new parts is recommended for all parts other than fuel pump and fuel level sensor (gauge).
Also, be sure to use new grommet, or oil leakage may occur.
1. Install lead wire, spacer and new grommet to fuel pump. Check that no foreign object is caught between grommet and fuel pump.
2. Apply engine oil to grommet.
3. Fit cushion and bracket to fuel pump.
4. Install assembly made in Step 3 above to bracket sub assembly. Check that no foreign object is caught between grommet and bracket sub
assembly.
Also, check that lug of bracket sub assembly fits in window of bracket.
