Esteem GLX Wagon L4-1.8L (1999)
Vehicle Speed Sensor: Service and Repair
Speed Sensor With Automatic Transaxle
REMOVAL
1. Disconnect negative cable at battery.
2. Disconnect A/T VSS coupler.
3. Remove A/T VSS by removing its bolt.
INSTALLATION
1. Apply A/T fluid to A/T VSS O-ring.
2. Install A/T VSS to A/T case and tighten bolt to specified torque.
Tightening Torque
(a): 5.5 Nm (0.55 kg.m, 4.0 ft. lbs.)
3. Connect A/T VSS coupler to A/T VSS.
4. Connect negative cable to battery.
