Esteem GLX Wagon L4-1.8L (1999)
Check vane sliding surface of cam ring for wear and damage. If any defect is found, replace pump assembly.
Rotor and Vane
^
Check sliding surfaces of rotor and vane for wear and damage.
^
Check clearance between rotor and vane.
Clearance:
Standard 0.01 mm (0.0004 inch)
Limit 0.06 mm (0.0023 inch)
Replace pump assembly if any defect is found in above checks.
Relief Valve (Flow Control Valve) and Its Spring
^
Check fluid passage of relief valve and orifice of connector for obstruction (clogged).
^
Check sliding surface of relief valve for wear and damage.
