Esteem GLX Wagon L4-1.8L (1999)
5. Install rotor to shaft, directing dot marked side of rotor facing up.
6. Install new snap ring to shaft, then make sure to fit snap into shaft groove securely.
NOTE: Never reuse the removed snap ring.
7. Apply power steering fluid to sliding surface of cam ring.
8. Install cam ring to pump body. The tapered end of cam ring should face the side plate.
9. Apply power steering fluid to each vane.
10. Install vanes (10 pieces) to rotor.
11. Apply power steering fluid to O-ring.
12. Install O-ring to pump body.
13. Apply power steering fluid to sliding surface of pump cover and rotor.