Esteem GLX Wagon L4-1.8L (1999)
Suspension Strut / Shock Absorber: Service and Repair
Front Strut
STRUT ASSEMBLY
NOTE: When disassembling strut assembly, loosen strut nut a little before removing strut assembly from vehicle. This will make disassembly easier.
Note, however, nut must not be removed at this point.
REMOVAL
1. Hoist vehicle, allowing front suspension to hang free.
2. Remove wheel.
3. Remove E ring securing brake hose and take brake hose off strut bracket as shown.
4. Remove ABS wheel speed sensor harness mounting bolt (If equipped).
5. Remove strut bracket bolts.
6. Remove strut support nuts. Hold strut by hand so that it will not fall off.
7. Remove strut assembly.
DISASSEMBLY
