Esteem GLX Wagon Plus L4-1.6L (1998)
Headlamp Dimmer Switch: Testing and Inspection
COMBINATION SWITCH
Combination switch incorporates lighting, turn signal, hazard warning light, dimmer, passing light, cruise control and wiper/washer switches.
Inspection
1) Disconnect negative (-) cable at battery.
2) Disconnect combination switch lead wire connectors from junction/fuse block.
3) Use a circuit tester to check the continuity at each switch position. If any continuity is not obtained, replace switch.
Removal/Installation
For removal/installation of combination switch, refer to Air Bag, Steering Wheel and Column.
