Esteem GLX Wagon Plus L4-1.6L (1998)
Vehicle Speed Sensor: Service and Repair
Speedometer Drive With Automatic Transaxle
VEHICLE SPEED SENSOR (VSS, SPEEDOMETER DRIVEN GEAR)
REMOVAL
1. Disconnect negative cable at battery.
2. Disconnect Vehicle Speed Sensor (VSS) coupler.
3. Remove VSS.
INSTALLATION
1. Check O-ring and VSS surface for their flawlessness, apply oil to O-ring and driven gear and then install Vehicle Speed Sensor (VSS) to
transmission.
Tightening Torque (a): 5.5 Nm (0.55 kg-m, 4.0 ft. lbs.)
2. Connect VSS coupler.
