suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Throttle Position Sensor > < Power Steering Pressure Switch|Specifications
Page 1
background image

Power Steering Pressure Switch: Description and Operation

This signal is sent from the power steering pressure switch. The power steering pressure switch is installed on the power steering pump body. The switch
turns ON when the oil pressure is higher than 3500 - 4500 kPa (35 - 45 kg-cm2, 215 - 285 psi). The turning of the steering wheel causes oil pressure to
increase. ECM uses it for controlling idle air control valve.

Throttle Position Sensor > < Power Steering Pressure Switch|Specifications