Esteem GLX Wagon Plus L4-1.6L (1998)
6. Place drive end frame on pulley, and then install rotor to drive end frame.
7. Install rear end frame to drive end frame.
8. Tighten 4 nuts to specified torque.
Tightening Torque: 4.5 N.m (0.45 kg-m, 3.5 lb-ft)
9. Install pulley and tighten pulley nut with holding shaft by using hexagonal box wrench to specified torque.
Tightening Torque: 113 N.m (11.3 kg-m, 81.5 lb-ft)
10. Install 4 rubber insulators.
