Esteem GLX Wagon Plus L4-1.6L (1998)
Permatex 80019, Liquid gasket Three Bond
1102 or equivalent
17.
Tighten adjusting plug in the following process.
a.
Torque plunger to 4.9 Nm (3.5 lb.ft.)
b.
Loosen plunger
c.
Torque plunger to 4.9 Nm (3.5 lb.ft.)
d.
Loosen plunger
e.
Torque plunger to 4.9 Nm (3.5 lb.ft.)
f.
Turn plunger counterclockwise approximately 22 degrees.
18.
While holding the adjusting plug, tighten plunger lock nut to specified torque.
TIGHTENING TORQUE:
58.8-73.5 Nm (43-54 lb.ft.)
19.
Make sure that the steering moves smoothly, by turning the input shaft in both directions lock to lock.
20.
Install power steering hydraulic pipes and tighten nuts to specified torque.
TIGHTENING TORQUE:
Valve housing side:
15.7-23.5 Nm (11.5-17 lb.ft.)
Steering shaft body side:
19.6-27.4 Nm (14.5-20 lb.ft.)
21.
Referring to the Service Manual, Re-install the steering gear in the vehicle.
Note:
Make sure the Toe-in is within specification.
Test drive vehicle to ensure the steering wheel
is straight
