Esteem GLX Wagon Plus L4-1.6L (1998)
-
Shift solenoid No.1 and No.2 and TCC solenoid Check resistance between terminal and solenoid body.
Standard resistance: 11 - 15 ohms
-
Throttle pressure control solenoid Check resistance between each terminals.
Standard resistance: 3.3 - 3.7 ohms
Operation check
Shift solenoid valves No. 1 and No. 2.
1. Apply oiler to solenoid valve and give compression by hands and then check to be sure that transmission fluid. from oiler does not come out of
holes in solenoid valve when battery voltage is not conducted.
2. Under the same conditions as above, conduct battery voltage and then make sure that fluid comes out with vigor. If check result is not as
described, replace shift solenoid valve.
TCC solenoid valve