Esteem GLX Wagon Plus L4-1.6L (1998)
Support - Half Shaft/Short Shaft: Service and Repair
Assembly
Install center shaft by reversing removal procedure and noting following points.
-
When installing bearing support circlip, make sure that it fits in circlip groove in center bearing support securely as shown.
-
When installing left side oil seal, use care so that it is in proper direction by referring to image.
"A": Grease
-
After press-fitting center shaft from left side oil seal side, fit circlip into groove in shaft securely.
-
When installing right side oil seal, use care so that it is in proper direction by referring to image.
"A": Grease
