Esteem GLX Wagon Plus L4-1.8L (1999)
8. Remove brake back plate.
INSTALLATION
1. Apply water tight sealant to mating surfaces of brake back plate and rear knuckle.
"A": Sealant 99000-31090
2. Install brake back plate and tighten back plate bolts to specified torque.
Tightening Torque (a): 23 Nm (2.3 kg.m, 17.0 ft. lbs.)
3. Install parking brake cable to brake plate.
4. Install wheel cylinder, and tighten wheel cylinder bolts and brake pipe flare nut to specified torque. (Refer to steps 1) to 4) of WHEEL
CYLINDER INSTALLATION.)
5. Install brake shoes, referring to steps 1) and 2) of its INSTALLATION.
6. Install wheel hub assembly, washer and new spindle nut.
