Esteem GLX Wagon Plus L4-1.8L (1999)
1. Install master cylinder as shown and torque attaching nuts (a) to 13 Nm (9.5 ft. lbs.).
2. Attach hydraulic lines and torque flare nuts (b) to 16 Nm (11.5 ft. lbs.).
3. Connect reservoir lead wire.
4. Fill reservoir with specified brake fluid.
5. After installing, bleed air from system and check brake pedal height and play. See: Brake Bleeding/Service and Repair
6. Perform brake test and check each installed part for fluid leakage.
Overhaul
DISASSEMBLY
1. Remove circlip.
2. Remove primary piston.