Esteem GLX Wagon Plus L4-1.8L (1999)
3. Remove piston stopper bolt. Then remove secondary piston by blowing compressed air into hole from which piston stopper bolt was removed. Be
cautious during removal as secondary piston jumps out.
NOTE: Before assembling, wash each part in fluid recommended to use for that vehicle.
ASSEMBLY
1. Assemble secondary piston as shown in above image.
2. Install secondary piston assembly into cylinder.
NOTE: Align long hole in secondary piston with stopper bolt hole in master cylinder body when installing it.
3. Install primary piston assembly into cylinder.
4. Depress, and install circlip.
5. Install piston stopper bolt (b) with pistons pushed in all the way and tighten it to 2.5 Nm (2.0 ft. lbs.).
