suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Engine, Cooling and Exhaust > < Vehicle Lifting|Service Precautions
Page 2
background image

after this confirmation.

-

Make absolutely sure to lock hoist after vehicle is hoisted up.

In raising front or rear vehicle end off the floor by jacking, be sure to put the jack against the front end of the engine mounting member or rear
suspension frame.

To perform service with either front or rear vehicle end jacked up, be sure to place safety stands under body so that body is securely supported. And then
check to ensure that body does not slide on safety stands and the vehicle is held stable for safety's sake.

WARNING:

-

Never apply jack against suspension parts (i.e., stabilizer, etc.) or vehicle floor, or it may get deformed.

-

If the vehicle to be jacked up only at the front or rear end, be sure to block the wheels on ground in order to ensure safety.
After the vehicle is jacked up, be sure to support it on stands. It is extremely dangerous to do any work on the vehicle raised on jack
alone.

Engine, Cooling and Exhaust > < Vehicle Lifting|Service Precautions