Esteem GLX Wagon Plus L4-1.8L (1999)
Resistance between terminal: 1.2 - 1.6 k Ohms at 20°C (68°F)
Resistance between terminal and sensor body: 1 M Ohms or more
If any faulty is found, replace.
SENSOR ROTOR INSPECTION
^
Check rotor serration (teeth) for being missing, damaged or deformed.
^
Turn drive shaft and check if rotor rotation is free from eccentricity and looseness.
^
Check that no foreign material is attached. If any faulty is found, repair or replace.
INSTALLATION
1. Check that no foreign material is attached to sensor and rotor.
2. Install it by reversing removal procedure.
Tightening Torque (a): 23 Nm (2.3 kg.m, 17.0 ft. lbs.)
CAUTION:
^
Do not pull wire harness or twist more than necessary when installing front wheel speed sensor.
^
Fit harness grommet to inner fender securely.
3. Check that there is no clearance between sensor and knuckle.
