suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Load Test|Page 2772 > < Load Test|Page 2770
Page 1
background image

Battery: Testing and Inspection
Undercharged Battery

This condition, as evidenced by slow cranking can be caused by one or more of the following conditions even though indicator lamp may be operating
normal.

Following procedure also applies to cars with voltmeter and ammeter.

1. Make sure that undercharged condition has not been caused by accessories left on for extended period of time.
2. Check drive belt for proper tension.
3. If battery defect is suspected, refer to Battery.
4. Inspect wiring for defects. Check all connections for tightness and cleanliness, battery cable connections at battery, starter and ignition ground

cable.

5. Connect voltmeter and ammeter as shown in figure.

Voltmeter 
Set between generator B terminal and ground.

Ammeter 
Set between generator B terminal and battery (+) terminal.

NOTE:  Use fully charged battery.

6. Measure current and voltage.

No-load Check 

Load Test|Page 2772 > < Load Test|Page 2770