Esteem GLX Wagon Plus L4-1.8L (1999)
-
Inspect commutator for dirt or burn. Correct with sandpaper or lathe, if necessary.
-
Check commutator for uneven wear with armature supported on V-blocks. If deflection of dial gauge pointer exceeds limit, repair or replace.
NOTE: Below specification presupposes that armature is free from bend. Bent shaft must be replaced.
Commutator out of round
Standard: 0.05 mm (0.002 in.) or less
Limit : 0.4 mm (0.015 in.)
-
Inspect commutator for wear. If diameter is below limit, replace armature.
Commutator outside diameter
Standard: 29.4 mm (1.16 in.)
Limit : 28.8 mm (1.13 in.)
