Esteem GLX Wagon Plus L4-1.8L (1999)
Power Steering Pump: Testing and Inspection
Hydraulic Pressure Check
HYDRAULIC PRESSURE IN P/S CIRCUIT CHECK
1. After cleaning joint of high pressure hose and P/S pump thoroughly, disconnect hose from pump and install special tool (oil pressure gauge,
attachment and hose). Tighten each flare nut to specified torque.
CAUTION: Take care not to causes damage to A/C condenser during service operation, if equipped.
Special Tools
(A): 09915-77410 (Oil pressure gauge)
(B): 09915-77420 (Attachment & hose)
2. Check each connection for fluid leakage and bleed air.
3. With engine idling, turn steering wheel and warm up engine till temperature of fluid in tank rises to 50 - 60° C (122 - 140° F).
