Esteem GLX Wagon Plus L4-1.8L (1999)
4. Position boot properly in grooves of gear case and tie rod and clamp it with wire and clip. Wire should be new and should go around twice and be
tightened with its both ends twisted together. The twisted ends should be bent in the circumferential direction. After this, check to ensure that boot
is free from twist and dent.
5. Install tie rod end lock nut and tie rod end to tie rod. Position lock nut to making made in removal.
NOTE: When tie rod was replaced, measure length "A" on removed tie rod and use it on new replacement tie rod so as to position lock nut
properly.
6. Install steering gear box to vehicle.
