Esteem GLX Wagon Plus L4-1.8L (1999)
Stabilizer Bushing: Service and Repair
Rear
STABILIZER BAR/BUSHINGS (IF EQUIPPED)
REMOVAL
CAUTION: To avoid the risk of being burned, start your work after the exhaust system has cooled down.
1. Hoist vehicle and remove rear wheels.
2. Remove stabilizer link nuts. Then remove stabilizer joints from stabilizer bar. When loosening link nut and joint nut, hold stud with wrench.
3. Remove stabilizer mount brackets.
4. Remove stabilizer bar.
INSTALLATION
1. Loosely assemble all components in reverse order of removal.