Esteem GLX Wagon Plus L4-1.8L (1999)
INSTALLATION
1. Install hub bolts.
2. For ABS equipped vehicle, check ABS wheel speed sensor rotor for damage.
3. Install wheel hub assembly, washer and new spindle nut.
4. Tighten spindle nut to specified torque.
NOTE: Removed spindle nut must be replaced with new one.
Tightening Torque (a): 175 Nm (17.5 kg-m, 126.5 ft. lbs.)
5. Calk spindle nut securely.
6. Install spindle cap to wheel hub.
NOTE:
^
When installing spindle cap, hammer lightly several locations on the collar of cap until collar comes closely into contact with wheel hub.
^
If fitting part of cap is deformed or damaged or if it is fitted loosely, replace with new one.
7. Install brake disc, caliper, and wheel.
8. Perform brake test.
