Removing and Installing Tailgate Lower Garnish Molding for Forenza L4-20L (2004)
Trunk / Liftgate Cover: Service and Repair
Tailgate Lower Garnish Molding Removal and Installation
Tailgate Lower Garnish Molding Removal and Installation
For HATCHBACK model
Tools Required:
KM-475-B Trim Remover
Removal
1. Open the tailgate.
2. Remove the tailgate upper garnish molding.
3. Remove the tailgate lower garnish molding clips using the trim remover KM-475-B.
4. Remove the lower garnish molding.
Installation
1. Install the tailgate lower garnish molding with the clips.
2. Install the tailgate upper garnish molding.
3. Close the tailgate.
For STATION WAGON model
Removal
1. Remove the tailgate upper garnish molding.