Forenza L4-2.0L (2004)
Seat Back: Service and Repair
Split Rear Seatback Hinge Removal and Installation
Split Rear Seatback Hinge Removal and Installation
Removal
1. Remove the rear seatback and the rear seat cushion.
2. Remove the bolts and the seatback center hinge.
Installation
CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature
corrosion.
1. Install the seatback center hinge with the bolts.
Tighten: Tighten the rear seat hinge bolts to 45 Nm (33 ft. lbs.).
2. Install the rear seatback and the rear seat cushion.
