Forenza L4-2.0L (2004)
Brake Hose/Line: Service and Repair
Rear Brakes
Brake Hose (Rear) Removal and Installation
Removal
1. Raise and suitably support the vehicle.
2. Remove the brake hose retainer.
3. Disconnect the brake pipe line from the disc brake hose.
4. Remove the rear disc brake hose retainer and the brake hose from the bracket on the steering knuckle shaft.
5. Remove the rear disc brake hose from the caliper.
Installation
1. Connect the brake pipe line to the brake hose.
Tighten: Tighten the brake line to 16 Nm (12 ft. lbs.).
