Forenza L4-2.0L (2004)
15. Remove the parking brake cables from the vehicle.
Installation
1. Install the new parking brake cable (if necessary) through the rear drum brake backing plate and attach to the brake trailing shoe lever.
2. Insert the plastic sleeve in the rear drum backing plate and press in the retaining ring. Ensure the parking brake cable is routed correctly.
3. Install the rear brake drums by fastening the detent screw.
Tighten: Tighten the rear brake drum detent screw to 4 Nm (35 inch lbs.).
4. Install the parking brake cable to the trailing shoe.
5. Install the retaining pin.
