Forenza L4-2.0L (2004)
1. Fasten the parking brake switch to the parking brake lever assembly with the screw.
Tighten: Tighten the parking brake switch-to-parking brake lever screw to 4 Nm (35 inch lbs.).
2. Install the parking brake lever bolts, and fasten the parking brake lever assembly to the vehicle underbody.
Tighten: Tighten the parking brake lever assembly-to-vehicle underbody bolts to 22 Nm (16 ft. lbs.).
3. Install the hex nut on the end of pull rod.
4. Check the parking brake adjustment referring to the original removal adjustment nut measurement taken in the removal procedure.
5. Install the parking brake / gearshift console hood.
