Forenza L4-2.0L (2004)
Cruise Control Servo Cable: Service and Repair
Actuator Control Cable Removal and Installation
Removal
1. Separate the hood release cable from the hood latch release handle.
2. Carefully remove the knee bolster trim panel by pulling until the retaining clips are free from the slots in the instrument panel.
3. Remove the knee bolster. Refer to Driver's Side Knee Bolster Removal and Installation.
4. Press the release button on the cable adjuster and push the cable toward the adjuster until the spring is compressed.
5. Remove the cable bushing from the accelerator assembly.
