Forenza L4-2.0L (2004)
59. Install the front timing belt cover bolts.
Tighten: Tighten the front timing belt cover bolts to 8 Nm (71 inch lbs.).
60. Install the engine lifting device.
61. Remove the engine from the engine overhaul stand KM-412.
62. Install a new crankshaft rear oil seal using installer J-36792 or KM-635.
63. Install the flywheel or flexible plate.
64. Install the flywheel or the flexible plate bolts.
Tighten: Tighten the flywheel bolts to 65 Nm (48 ft. lbs.). Use the angular torque gauge KM-470-B to tighten the flywheel bolts another 30° plus
15°. For the automatic transmission, tighten the flexible plate bolts to 45 Nm (33 ft. lbs.).
65. Install the engine.
