Forenza L4-2.0L (2004)
2.
Download and review the Suzuki Pass-Thru Reprogramming Tool Operator's Manual. This must be read and understood COMPLETELY before
attempting to reprogram the ECM.
3.
Following the procedure outlined in the Suzuki Pass-Thru Reprogramming Tool Operator's Manual, download and install the Pass-Thru
Reprogramming Software "3_SOFTWARE.EXE" and the Suzuki Pass-Thru Reprogramming Data Base Calibration Files "4_DATABASE1.EXE"
onto your PC.
4.
Following the procedures outlined in the Suzuki Pass-Thru Reprogramming Tool Operator's Manual hook up the SDS Interface Tool P/N
09910-06520 to the vehicle and run the ECM reprogramming software.
5.
When the ECM reprogramming is complete fill out the Reprogram Label PIN 99963-01501-224 and affix it to the inside left of the glove box door
as shown.
Disclaimer
Technical Service Bulletin # TS03
Date: 050929
Engine Controls - High/Rough Engine Idle/Stalling
Section Title: Engine
TSB No. TS 03 09295R
Division: Automotive
Category: Technical
SUBJECT:
ECM REPROGRAMMING FOR HIGH IDLE, ROUGH IDLE/STALL
MODEL(S):
FORENZA SEDAN/WAGON, RENO (RQ420)