Forenza L4-2.0L (2004)
3.
Following the procedure outlined in the Suzuki Pass-Thru Reprogramming Tool Operator's Manual, download and install the Pass-Thru
Reprogramming Software "3_SOFTWARE.EXE" and the Suzuki Pass-Thru Reprogramming Data Base Calibration Files "4_DATABASE1.EXE"
onto your PC.
4.
Following the procedures outlined in the Suzuki Pass-Thru Reprogramming Tool Operator's Manual hook up the SDS Interface Tool P/N
09910-06520 to the vehicle and run the ECM reprogramming software.
5.
When the ECM reprogramming is complete fill out the Reprogram Label PIN 99963-01501-224 and affix it to the inside left of the glove box door
as shown.
Disclaimer
