Forenza L4-2.0L (2004)
YEAR:
2004-2005
REVISION:
Warranty Claim Information has been changed.
CONDITION:
During cold engine operation, vehicles with manual transmission may exhibit a high idle (2000 + r.p.m.) for up to ten seconds when coming to a stop
with the clutch released.
During cold engine operation, vehicles with automatic transmission may exhibit a rough idle/stall in neutral/park in the first ten seconds of engine
operation or in gear if a shift occurs quicker than 15 seconds after starting.
CAUSE:
ECM Software Logic
CORRECTION:
Engine idle can be improved by reprogramming the ECM. Follow the reprogramming procedure described below.
REQUIRED TOOLS AND SOFTWARE
WARRANTY CLAIM INFORMATION
Reprogramming Procedure:
1.
Log onto the SCAT system and access the Suzuki Pitstop. Click on "OBD/OBDII DIAGNOSTICS"
2.
Download and review the Suzuki Pass-Thru Reprogramming Tool Operator's Manual. This must be read and understood COMPLETELY before
attempting to reprogram the ECM.
3.
Following the procedure outlined in the Suzuki Pass-Thru Reprogramming Tool Operator's Manual, download and install the Pass-Thru
Reprogramming Software "3_SOFTWARE.EXE" and the Suzuki Pass-Thru Reprogramming Data Base Calibration Files "4_DATABASE1.EXE"
onto your PC.
4.
Following the procedures outlined in the Suzuki Pass-Thru Reprogramming Tool Operator's Manual hook up the SDS Interface Tool P/N
09910-06520 to the vehicle and run the ECM reprogramming software.
