Forenza L4-2.0L (2004)
2. Install the seat belt retractor bracket with the screw.
Tighten: Tighten the seat belt bracket screw to 3 Nm (27 lb.in).
3. Install the upper B-pillar seat belt anchor with the bolt.
Tighten: Tighten the seat belt anchor bolt to 38 Nm (28 lb.ft).
4. Install the seat belt anchor plastic cap.
5. Install the lower B-pillar trim panel.
6. Install the lower B-pillar seat belt anchor with the bolt.
Tighten: Tighten the seat belt anchor bolt to 38 Nm (28 lb.ft).
7. Install the seat belt anchor plastic cap.
