Forenza L4-2.0L (2004)
2. Install the generator and the lower support bracket assembly to the engine block (as shown).
Tighten: Tighten the generator and the lower bracket-to-engine block bolts to 37 Nm (27 ft. lbs.).
3. Install the generator-to-intake manifold and cylinder head support bracket bolts, the generator-to-intake manifold strap bracket bolt, and the intake
manifold-to-cylinder body strap bracket bolts over the starter.
Tighten:
Tighten the generator-to-intake manifold and cylinder head support bracket bolts to 37 Nm (27 ft. lbs.).
Tighten the generator-to-intake manifold strap bracket bolt and the intake manifold-to-cylinder body strap bracket bolts to 22 Nm (16 ft. lbs.).
4. Route the serpentine accessory drive belt. Refer to Serpentine Drive Belt Removal and Installation.
5. Relieve tension on the belt by first applying downward pressure on the automatic tension roller bolt and releasing pressure once the belt is in place.
6. Install the power steering reservoir.
