Forenza L4-2.0L (2004)
Clutch Disc: Testing and Inspection
Pressure Plate and Clutch Disc Inspection
Clutch Disc
1. Visual Inspection
^
Inspect the worn or oily contamination on the clutch surface.
^
Inspect the damaged or weakened torsion spring.
^
Inspect the a warped or bent clutch disc. After inspection, replace new clutch disc, if necessary.
2. Clutch Disc Inspection
^
Measure the rivet head depth from the clutch disc surface.
^
Replace the clutch disc if the measured value is below the limit.
^
Rivet Head Depth (Limit): 0.3 mm (0.012 inch)
Pressure Plate
1. Check for a worn diaphragm spring finger.
2. Check for a worn or cracked pressure plate surface.
3. Check for the polluted face by the oil. After inspection, replace the pressure plate if necessary.
