Forenza L4-2.0L (2004)
Wiper Switch: Service and Repair
Wiper Switch and Lever Removal and Installation
Removal
1. Disconnect the negative battery cable.
2. Remove the upper and the lower steering column cover panel screws.
3. Remove the upper and the lower steering column cover panels.
4. Remove the wiper switch by pushing the tabs on the top and the bottom of the switch housing.
5. Disconnect the electrical connector from the wiper switch. Disconnect the cruise control connector, if so equipped.
Installation
1. Connect the electrical connector to the wiper switch. Connect the cruise control connector, if so equipped.