Grand Vitara 2WD L4-2.4L (2009)
Installation
1) Install hydraulic unit control module assembly by reversing removal procedure.
Tightening torque
Brake pipe flare nut for M10: 16 Nm (1.6 kg-m, 12.0 ft. lbs.)
Brake pipe flare nut for M12: 19 Nm (1.9 kg-m, 14.0 ft. lbs.)
ABS (ESP@) hydraulic unit control module assembly bolt: 9 Nm (0.9 kg-m, 7.0 ft. lbs.)
ABS (ESP@) hydraulic unit control module assembly bracket bolt: 25 Nm (2.5 kg-m, 18.5 ft. lbs.)
ABS (ESP@) hydraulic unit control module assembly bracket nut: 25 Nm (2.5 kg-m, 18.5 ft. lbs.)
2) Connect ABS ESP (R) control module connector and lock it as shown in figure.